TT.Mk1 Glovebox Removal

From QuattroWorld Wiki

Back to 2000-2005 (Mk1)

Submitted by: SprinTTer
Entered by: MCPaudiTT

Glove box, removing and installing

1 - Glove box

Removing:
- Unclip dash panel end trim.
- Unplug connector for glove box light
- Remove screws from the side
- Remove screw -2-.
- Open glove box lid.
- Remove screws -3- (3x).
- Pull sides of frame outward.
- Take out glove box downward.
- Unplug connector for passenger airbag key switch.
- Remove deactivation switch for front passenger's airbag.
Installing
- Pull sides of frame outward.
- Fit glove box with inner side first.
Remainder of installation is performed in reverse order of removal
2 - Screw (2x)
3.5 Nm (31 in. lb)
3 - Screws (3x)
3.5 Nm (31 in. lb)
4 - Dash panel

Removing screws on side
- Remove screws -3- (2x).